@article { author = {Rezazadeh, Mohammad Soheil and Ganjalikhani, Moein and Zounemat-Kermani, Mohammad}, title = {Comparing the performance of semi-distributed SWAT and lumped HEC-HMS hydrological models in simulating river discharge (Case study: Ab-Bakhsha Watershed)}, journal = {Iranian journal of Ecohydrology}, volume = {2}, number = {4}, pages = {467-479}, year = {2015}, publisher = {Faculty of New Sciences and Technologies, University of Tehran}, issn = {2423-6098}, eissn = {2423-6101}, doi = {10.22059/ije.2015.58074}, abstract = {In many flood control projects, watershed management and water resources development, calculation of the river flow discharge is of the paramount importance which requires a comprehensive hydrological modeling of the region of interest. In this respect, lack of the existence of hydrometric and meteorology measuring stations in most of watersheds, has caused numerous problems in development and management of water resources planning. The hydrological models which are used to simulate watersheds are generally categorized into two groups of lumped anddistributed models. In this study SWAT and HEC-HMS models were used to compare the capability of semi-distributed and lumped models in watershed simulation. For this, 31-year data of Abakhsha Watershed - including the whole information of hydrometer and meteorology stations in the region which are located in Bardsir County in Kerman province - have been used. The obtained results indicate that both models have acceptable accuracy; however, semi-distributed SWAT model is superior to HEC-HMS model. Being semi-distributed is one of the most important reasons for SWAT’s superiority which gets the advantage of considering climate components and using hydrological response units.}, keywords = {SWAT,HEC-HMS,Semi-distributed model,lumped model,Ab-Bakhsha Watershed}, title_fa = {مقایسۀ عملکرد مدل هیدرولوژیکی نیمه‌توزیعی SWAT و مدل یکپارچۀ HEC-HMS در شبیه‏سازی دبی جریان (مطالعۀ موردی: حوضۀ آب‏بخشا)}, abstract_fa = {مطالعات سیل و کنترل سیلاب یکی از مباحث اصلی مرتبط با علم هیدرواکولوژی است که از نتایج آن در مدیریت اراضی و تغییر کاربری مناطق مد نظر استفاده می‏شود. این در حالی است که مدل‏های هیدرولوژیکی‌ای که برای شبیه‏سازی حوضه‏های آبخیز ‌استفاده می‌شوند عموماً به دو گروه یکپارچه و توزیعی تقسیم می‏شوند. به‌علت تفاوت مدل‏های هیدرولوژیکی در استفاده از داده‏ها و روش‏های مختلف برای شبیه‏سازی جریان، شناسایی مدلی کارآمد که با توجه به اینکه بیشتر حوضه‏های آبخیز کشور فاقد ایستگاه‏های اندازه‏گیری به تعداد کافی هستند، بتواند شبیه‏سازی را در کوتاه‏ترین زمان و با کمترین هزینه به‏طور مطلوب انجام دهد، امری ضروری است. در پژوهش حاضر به‏منظور مقایسۀ عملکرد مدل‏های نیمه‌توزیعی و یکپارچه در شبیه‏سازی حوضه‏های آبخیز از مدل SWAT در شبیه‏سازی دبی جریان رودخانه به‏عنوان یک مدل نیمه‌توزیعی و مدل HEC-HMS به‏عنوان مدل یکپارچه استفاده شد. بدین‌منظور از داده‏های ۳۱ سالۀ حوضۀ آبخیز آب‏بخشا واقع در شهرستان بردسیر استان کرمان شامل کلیۀ اطلاعات ایستگاه‏های هیدرومتری و هواشناسی منطقه استفاده شد. یافته‏های به‌دست‌آمده از پژوهش برتری نتایج مدل SWAT را نسبت به مدل HEC-HMS نشان می‏دهد. به‏طوری‏که مدل نیمه‌توزیعی SWAT در مرحلۀ اعتبارسنجی با ضریب تعیین معادل ۷۱/۰ و ضریب راندمان برابر با ۶۸/۰ دقتی بیشتر از مدل HEC-HMS با ضریب تعیین معادل ۵۸/۰ و ضریب راندمان برابر با ۴۸/۰ را دار‌است. از مهم‏ترین دلایل برتری مدل نیمه‌توزیعی نسبت به مدل یکپارچه می‏توان به مواردی همچون داشتن مولد اقلیمی و امکان به‏کارگیری واحد پاسخ هیدرولوژیک در آن اشاره کرد. ‌  }, keywords_fa = {SWAT,HEC-HMS,Semi-distributed model,lumped model,Ab-Bakhsha Watershed}, url = {https://ije.ut.ac.ir/article_58074.html}, eprint = {https://ije.ut.ac.ir/article_58074_9c2fa71acbc714474cf76a3d2a7ee401.pdf} }